FXA60A6 High-Cycle Concrete Vibrator table saw The wide 500 mm (20-inch)

The wide 500 mm (20-inch) plate covers more area per pass

Description 594591101 SHAFT

060 and 3202

Long-Term Investment

FXA60A6 High-Cycle Concrete Vibrator table saw The wide 500 mm (20-inch)FXA60A6 High Cycle Concrete Vibrator 2. 375" head, 20' hose, 33' cord, 180 Hz, High cycle vibrators are used with low slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load. Powered by a 4. 5