When you purchase a new car from the car dealership, it shines and sparkles and the color of its paintwork is bright and saturated. But after some time, you begin to notice that your very new car began to look dim, the paint on it is no longer so shining, and in some places small, low-minute strips-tsarapins and spots that do not launder. This comes from the fact that such negative factors such as sunlight, from which the paint burns out, snow and sand, from which small scratches and chemicals that corrode protective layer of the body appear on the machine.
What to do to protect the LKP car from negative impact? It needs to be correctly protected. If the car has some coverage defects can be eliminated using a polish polish. You can even make repairs of chips on the car body. The polish is divided into two types – abrasive and protective. The abrasive polish contains small particles, which cleaning the upper layer of the coating, eliminate small scratches and stained stains. The protective polish covers the body of the car with a special wax film, under the layer of which paint and varnish remain intact and are not damaged from small mechanical and chemical influences.
First you need to contact a service station, but if you want to do your own work, you need to know how to use a polish correctly. First you need to decide what degree of damage to the LKP in your car. Polivals are of different abrasiveness, that is, they have a different size of cleaning particles. If the scratches on the body are quite deep, and the car itself is quite old, then you need to use a polish with large abrasive particles. If the car is new or freshly painted, a protective polish will be enough. After you have chosen a suitable body for the body, you can proceed directly to the polishing. This procedure is quite simple, for it you do not need any special skills. First you need to wash the car well and wait until the body dries. The air temperature in the room or on the street where you are going to polish should not be lower than +15 degrees or too high. Do not put the car in the sun. Gently apply a little polish on a soft, not vilely cloth and apply it to the body. Waiting when the layer dries a little (becomes muddy-white) thoroughly dispose of it until the shine appears.
You need to apply the polish in stages, first on one part of the body, for example, a wing, and then for others. This is done so that the layer of the product does not dry out, otherwise it will be difficult to steal well.